- Altoona tested for a 12 year / 500,000 mile life cycle
- Side impact crash tested
- Roof crush tested
- Integrally welded, monocoque body construction
- Welded steel gussets at all window posts
- Fully welded, 11 gauge steel wheelwells
- Grit blasted cage preparation
- Entire body structure is coated with PPG - CRE904 primer/sealer
- An additional coating of PPG, Corashield is applied to the exterior of all exposed structural steel surfaces
- The interior of all tubular structures are coated with Ziebart - Type A rust proofing
- Solid steel rear engine firewall
- .080 inch aluminum exterior sidewalls
- .063 inch aluminum exterior roof panel
- Undercoated and edge sealed .75 inch thick, AC grade plywood flooring
- 2.5 inch thick fiberglass insulation with R-7 rating
- Platinum gray melamine interior walls and ceiling finish
- Passenger windows are top T-slide type with 7/32 inch laminated safety glass
|
|
 |
- RCA rubber flooring with ribbed aisle
- Front slide/glide, entry/exit door - 37.5 inch x 80 inch panel opening, Vapor brand
- Color and number coded electrical wiring with protective loom
- Manual resetting circuit breakers
- As-built electrical junction compartment schematic
- All ICC required exterior lighting
- Fluorescent interior lighting with ad rails
- Stepwell lighting
- Rear engine compartment controls and gauges
- 7 inch x 14 inch exterior mirrors with integrated convex lenses
- Passenger assists fabricated of stainless steel
- Driver sun visor
- Dash mounted heater/defroster system
- Roof mounted emergency escape hatch and vent
- One color, full body paint finish
- Two-stage undercoating process
- Rear mud flaps
- Front tow hooks
- Transit grade HELP bumpers, front and rear
|
